ViewSonic Wi-Fi setup from your PC
- 24 Feb, 2012
1. Insert the Wi-Fi dongle (WPD-100) into USB slot in the back of the projector.
2. Using the keypad on the top of the projector or the button on the remote control, power on the projector and wait for the start up screen to appear.
3. Using the keypad on the top of the projector or the buttons on the remote control, select “source” then use the down arrow to select the “USB A” input.
Confirm using the right arrow key on the keypad on the top of the projector or the button on the remote control.
With the USB dongle icon highlighted press the down arrow key on the keypad on the top of the projector or the button on the remote control.
The following screen should appear…
4. On your PC, disconnect from whatever Wi-Fi network you may be connected to and reconnect to “PLED-W500”
5. Open your web browser and enter “http://192.168.100.10. The following screen should appear ...
6. Download and install the Projector Management Utility which is called MirrorOpLite.
7. Double click on the MirrorOpLite icon which has been installed on your desktop
8. The following window should appear on your desktop …
Press connect and the following windows will appear on your desktop …
Connecting … Connected …
Click on “play” and your desktop will be displayed by the projector.
Hey presto wireless presentation has been established !
9. To disconnect click on the “stop” icon