The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p @60Hz with up to 12 bit colour depth) and 4K (4096x2160p @120Hz with up to 12 bit colour depth).
The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference-free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.
celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.
With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10+, not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural.*
Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24-bit/192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression.*
Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.
The prerequisite here, in addition to the ALLM-enabled TV, is that the source devices provide a high-quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM-capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made.*
Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.
The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.
Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly.
The additional Ethernet channel makes it possible to connect Internet-capable AV components to the in-house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu-Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables.
All celexon UHD HDMI fibre optic cables are individually tested for functionality using high-quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.
KEY INFORMATION
- HDMI-A plug to HDMI-A plug
- Standard: Ultra High Speed HDMI with Ethernet - HDMI 2.1 compliant
- Transmission rate: 48 Gbps
- Max. Resolution: 8K / 7680x4320p @60Hz 4:2:0; 4K / UltraHD 4096x2160p @120Hz 4:4:4
- Supported colour spaces: Deep Colour, x.v.Color.
- Supported audio standards: eARC, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
- Other features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4/ 2.2/ 2.3, EDID
- EMI-Free
- No external power supply necessary - 350 mW (max.) power consumption
- Connector: gold-plated contacts
- Cable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radius
- Cable colour: Black
- Cable type: Round
- Cable length: 70m
- REACH, RoHs compliant
IN THE BOX
- 1x celexon UHD Optical Fibre HDMI 2.1 8K Active Cable 70m, black
* All components used must support this feature.
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p @60Hz with up to 12 bit colour depth) and 4K (4096x2160p @120Hz with up to 12 bit colour depth).
The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference-free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.
celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.
With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10+, not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural.*
Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24-bit/192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression.*
Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.
The prerequisite here, in addition to the ALLM-enabled TV, is that the source devices provide a high-quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM-capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made.*
Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.
The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.
Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly.
The additional Ethernet channel makes it possible to connect Internet-capable AV components to the in-house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu-Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables.
All celexon UHD HDMI fibre optic cables are individually tested for functionality using high-quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.
KEY INFORMATION
- HDMI-A plug to HDMI-A plug
- Standard: Ultra High Speed HDMI with Ethernet - HDMI 2.1 compliant
- Transmission rate: 48 Gbps
- Max. Resolution: 8K / 7680x4320p @60Hz 4:2:0; 4K / UltraHD 4096x2160p @120Hz 4:4:4
- Supported colour spaces: Deep Colour, x.v.Color.
- Supported audio standards: eARC, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
- Other features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4/ 2.2/ 2.3, EDID
- EMI-Free
- No external power supply necessary - 350 mW (max.) power consumption
- Connector: gold-plated contacts
- Cable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radius
- Cable colour: Black
- Cable type: Round
- Cable length: 70m
- REACH, RoHs compliant
IN THE BOX
- 1x celexon UHD Optical Fibre HDMI 2.1 8K Active Cable 70m, black
* All components used must support this feature.
Cut off times for shipping (UK TIME BST/GMT):
These are the standard cut-off times below, however if you require an urgent shipment after these times, please call on +44 (0)1924 589 589
- Screens & Maxlight Cabinets: 12:00pm
- Celexon Products: 12pm
- Pico Genie Products: 3.45pm
- All Other Products: 3:30pm
Shipping Speeds & Costs
See our newly improved discounted shipping rates with up to 67% discount
Country | Courier* | Delivery Speed | Courier / Costs | Note |
---|---|---|---|---|
United Kingdom | UPS |
Next Working Day Delivery
Saturday Delivery |
UPS Standard (Next Working Day) UPS Express (Pre 12pm Next Working Day) at £16.99 UPS Saturday Delivery |
Accessories* £2.99 inc vat NOTE: All Screens 3 - 5 Working Days * Accessories to Ireland £4.99 (3 - 5 Business Days) |
USA & Canada | UPS | 2 to 5 working days | From £23.38 (Orders <$800 for USA no taxes / duties usually apply) | For accurate shipping costs, add the product to the checkout and fill out your address Calculate any Duties & Taxes here (if outside UK) |
Northern Ireland | UPS | 2 to 3 working days |
From £9.68 (Was £16.42) Saves 41% |
|
European Shipping Rates | UPS | 2 to 5 working days |
From £11.03 (Was £15.88) |
|
Rest of World Shipping Rates | UPS | 3 to 7 working days (Rest of world) |
From £22.09 (Was £37.02) Saves 67% Calculated based on country, dimensions and weight |
Delivery Terms
We reserve the right to charge for any postal surcharges levied by the courier eg for non mainland UK, Highlands and Islands.
* For some products such as screens are also shipped via UPS, TNT, DHL, DPD and some accessories are shipped via Royal Mail.
Delivery Notifications / Signing
If you can provide a mobile number and/ or an email address when you place your order, you will receive a notification of delivery.
UPS Collection Centres
If your package is shipped via UPS, customers at residential addresses can REDIRECT a delivery to a UPS ACCESS POINT (collection point) of their choice if they are not going to be in. You can notify them by email or text.
Find your nearest collection point https://www.ups.com/dropoff/
EU & Outside UK & Taxes (more Tax info here)
Since January 1st 2021, post Brexit, all goods sold outside the UK will be sold excluding taxes.
For more information on taxes, the shipping process and examples please SEE TAX SECTION FOR MORE INFO.
Shipping Terms
Whilst we make every effort to deliver goods on the day we specify, we cannot guarantee delivery on that day or accept liability for deliveries made outside this timescale. Delays are rare to our courier services but they can happen especially in busy periods and no refunds can be made for delays to any postal service whatsoever. We cannot accept liability for out of pocket expenses or other costs incurred due to failed or delayed deliveries. We reserve the right to change the courier services at any time.
All items are subject to stock availability and we reserve the right to cancel any item ordered at any time and provide you with a full refund.
When we deliver your items to you will be asked to sign for the goods to acknowledge that you have received them. If your goods fail to arrive within 28 days of dispatch, you will have the option of either a full refund or a replacement shipment as soon as we have investigated with the courier.
Where an incorrect address has been given to Personal Projector Limited we reserve the right to charge for any extra carriage costs incurred.
Claims for damage, delivery discrepancy etc. should be made within 24 hours of delivery and any photographic evidence should be immediately submitted. Claims will not be accepted after 24 hours. Please sign the consignment document 'UNCHECKED', as we cannot otherwise accept any claims for damage in transit.
PO Box Deliveries
Deliveries are made by courier and require a signature on delivery, for this reason, it is not possible to deliver to a PO Box address. However for certain products you can re-arrange delivery to a UPS Access Point location (please enquire). You can use the access point as the delivery address. To find your nearest worldwide access point visit https://www.ups.com/dropoff/. You will be notified once it arrives by text or email.
If a PO address is used in the address and it is returned to us you may need to pay for the redelivery costs (if no UPS access point is assigned by you). This applies particularly to Cyprus or countries where PO box is used as standard term on the address.